6Six Needles

Hook-and-Loop Backing

Custom Velcro Patches: Hook-and-Loop for Gear, Uniforms & Bags

Custom velcro patches are patches with the hook side of a hook-and-loop fastener sewn to the back, so they press onto any loop panel and peel off again. VELCRO® is a brand name; what we supply is generic hook-and-loop backing that works the same way, on every patch construction we make, from 5 pieces.

  • No setup fees
  • Free digital mockup within 24 hours
  • No payment until you approve
  • Real sample photo before full run
  • Standard turnaround: 10 to 14 business days after sample approval
  • Tracked Shipping | No Extra Charges
  • 5-piece patch minimum
  • Trusted since 2015
  • Quality guarantee

What hook-and-loop backing is

Hook-and-loop is a two-part fastener. One face is covered in tiny stiff hooks, the other in soft loops; pressed together they hold, and pulled apart they release without damage. On a patch, the hook face is sewn to the back. The loop face is the panel already fitted to most packs, carriers, caps and some uniforms.

How it works in practice

1. Hook on the patch

We stitch the hook side to the back of your finished patch during production.

2. Loop on the gear

Your bag, carrier or cap supplies the loop panel. If it has none, a loop piece can be sewn on once.

3. Press and go

Line it up, press it down. It comes off cleanly when you want to change it.

Available on every construction

Embroidered

The most common hook-and-loop patch. Thread texture with the hook side stitched to the back.

Embroidered patches

PVC

Rubber front, hook backing. Wipes clean and handles weather better than thread.

PVC patches

Woven

Thin and flat, so it sits closer to the panel. Best for fine text and name strips.

Woven patches

Glow PVC

Glow front with hook backing for night-visible marker patches.

Glow PVC patches

Where it is used

Tactical gear

Panels on packs and carriers are already loop-faced, so the patch just presses on.

Bags and backpacks

Change the mark without altering the bag.

Hats and caps

For a front loop field, cap front: 2.25″–2.75″ h · 2.5″ recommended. Width follows your artwork.

Uniforms

Name and role patches that move between shifts or garments.

Jackets

Seasonal or event patches you take off before washing.

Team gear

One shared loop panel, many interchangeable team marks.

Tactical patches · morale patches · uniform patches

Embroidered vs PVC velcro patches

Embroidered vs PVC hook-and-loop patches
 EmbroideredPVC
LookClassic stitched textureMolded, raised rubber-like detail
WeatherAbsorbs water, dries outWaterproof, wipes clean
DetailBold logos and letteringBold shapes, solid colors
Typical useUniform name and unit patchesMorale, tactical and outdoor gear
100 pieces$2.50 each$3.50 each

Prices include the $0.30 hook-and-loop surcharge, read live from our price sheet.

What size should a velcro patch be?

Measure the loop panel first: the patch should sit inside it with a little loop showing on every side, so the edges grip. Morale and ID patches on packs and carriers are often around 2″ × 3″ or 3″ round; name strips are short and wide. Instant pricing covers anything up to 4″ on the longest side, and larger patches get a custom quote. See the patch size chart for more sizes.

Removable and interchangeable

The practical advantage is that the patch is not committed to one garment. One loop panel can carry a different patch each day, and patches come off before washing, which extends the life of both the patch and the garment. The trade-off is that hook-and-loop holds less firmly than stitching under heavy pull or sustained wind, so anything on a riding vest or a hard-wearing work jacket is better sewn.

Compare iron-on, sew-on and hook-and-loop · how to sew on a patch

Pricing

Hook-and-loop backing adds $0.30 per patch. Sew-on, iron-on and adhesive backing are included at no extra charge. Patch pricing itself depends on size, quantity and construction; instant pricing covers anything up to 4 inches on the longest side, and larger sizes get a custom quote.

See full pricing · current offers · patch advisor

Hook-and-loop questions

Is hook-and-loop the same as Velcro?

People use the word interchangeably, but VELCRO® is a brand name. What we supply is generic hook-and-loop backing, which functions the same way. We do not represent it as branded VELCRO® product.

Which side comes on the patch?

The hook side is sewn to the back of the patch. That is the side that grips, and it matches the loop panels already fitted to most bags, carriers and caps. If you need the loop side instead, say so on your order and we will note it.

Can I use it on bags?

Yes, as long as the bag has a loop panel. If it does not, a separate loop piece can be sewn to the bag first, or you can choose sew-on backing instead.

Is it available on PVC patches?

Yes. Hook-and-loop is available on every construction we make: embroidered, PVC, glow PVC, woven, printed, leather and chenille.

How much does hook-and-loop backing cost?

Hook-and-loop adds $0.30 per patch. Sew-on, iron-on and adhesive backing carry no extra charge. The surcharge is applied automatically in the calculator with the rest of your order.

Can I order 5 patches?

Every custom patch type starts at 5 pieces: embroidered, woven, printed, chenille, leather, PVC and glow-in-the-dark PVC. Larger quantities simply lower your per-piece price.

How does approval work?

You review and approve your free digital mockup before paying. After payment, we make a real sample and send you a photo of it to approve before the full production run begins.

Order hook-and-loop patches

Send your artwork and choose hook-and-loop as the backing. Free digital mockup within 24 hours, 10 to 14 business days after sample approval. No payment until you approve the mockup.

Related: K9 harness patches